The working principle and characteristics of the axis flow pump

1. The working principle of the axis flow pump

The working principle of the axial flow pump is different from the centrifugal pump. It mainly uses the thrust of the thrust generated by the high -speed rotation of the impeller. When the shaft pump leaf is rotated, the lift generated by the water can push the water from below to the top.

The leaves of the axis pump are generally not immersed in the pool of the water absorption source. Due to the high -speed rotation of the impeller, under the lift of the leaves, the water continuously presses the water continuously, so that the water flows along the water pipe. The leaf wheels continued to rotate, and the water was continuously pressed to a high place.

2. The general characteristics of axis flow pump

(1) The flowing direction of water in the axial flow pump is the axial inhalation and axial outflow of the impeller, so the axial flow pump is called the axial pump.

(2) Low -range (1 to 13 meters), large flow and high efficiency, suitable for drainage irrigation in plains, lakes, and river areas.

(3) No irrigation before starting, and the operation is simple.