In recent years, DC pump is known by many companies because of its small size, low power and high Factor of safety. Engineers will consider upgrading the original communication pump to DC pump. Now let me introduce you to the four advantages of brushless DC pumps that can replace communication pumps.

Firstly, the brushless DC pump uses electronic components for commutation, and the rotor orientation is detected through a program. Unlike traditional communication pumps, the motor rotates the carbon brush to produce wear and tear, and there is no need to use carbon brush commutation, which is a new pump skill. Many people may not be aware of this new pump skill, so let's carefully understand the product advantages of brushless DC pumps:

1. Brushless DC pump has high safety.

The common power supply for brushless DC pumps is a low-voltage 24V or 12V power supply, which is much lower than the human safety touch voltage of 36V. If the circuit is aged or leaked, it will not cause any damage to the human body and organisms. The communication pump is a high-voltage power supply, and once the circuit is aged or leaked, it will cause huge damage to the human body and organisms. In many industries, using communication pumps poses safety hazards. If swimming pool equipment, fish tank pumps, and dishwasher equipment leak, it will pose a safety hazard to the human body, and brushless DC pumps do not have this safety hazard.

2. Brushless DC pumps are more energy-efficient.

The traditional communication pump with a head of 3000L is less than 3M and requires a power of 100W. Therefore, many manufacturers have severe false standards for parameters (the normal error of pump parameters is around plus or minus 5%, and communication with pumps far exceeds). Therefore, when you use a water pump, you will consume a large amount of electrical energy because the collision loss caused by the rotating carbon brush of the communication pump motor is very large. The power of the brushless DC pump is 100W, the flow rate is close to 12000 L, and the head is 5M, because the loss of the brushless DC pump is very low and the efficiency is high.