Time:2022.11.14Browse:
1. If the geographical environment permits, the water pump should be as close to the water source as possible to reduce the length of the suction pipe. The foundation where the water pump is installed shall be firm, and a special foundation shall be built for the fixed pump station.
2. The water inlet pipe shall be sealed reliably and must be provided with special support. It shall not be hung on the water pump. The inlet pipe with bottom valve shall be installed vertically with the axis of the bottom valve and the horizontal plane as far as possible, and the included angle between the axis and the horizontal plane shall not be less than 45 °. When the water source is a channel, the bottom valve should be more than 0.50 meters above the water bottom, and the screen should be added to prevent debris from entering the pump.
3. The base of the machine and pump shall be horizontal and firmly connected with the foundation. When the machine and pump are driven by the belt, the tight edge of the belt is at the bottom, so that the transmission efficiency is high. The rotation direction of the pump impeller should be consistent with the direction indicated by the arrow; When coupling transmission is adopted, the machine and pump must be on the same axis.
4. The installation position of the water pump shall meet the requirements of the allowable vacuum suction height. The foundation must be horizontal and stable to ensure that the rotating direction of the power machine is consistent with that of the water pump.
5. If there are multiple units in the same machine room, there should be a distance of more than 800mm between the units and between the units and the wall.
6. The water pump suction pipe must be well sealed, and the elbows and gate valves shall be minimized. The air shall be exhausted during water injection. The air shall not accumulate in the pipe during operation. The suction pipe shall be slightly inclined upward to connect with the water inlet of the pump, and the water inlet shall have a certain submergence depth.