(1) The vertical energy -saving pump and the motor are the overall structure. When the factory leaves the factory, it is corrected by the manufacturer. It does not need to be adjusted during the installation process, so the installation process is more convenient.

(2) Before installation, you should carefully check whether the stones and iron sand that affect the operation of the pump operation should be carefully checked to prevent damage to the overcurrent parts during the operation of the energy -saving pump.

(3) The ground foot bolts need to be tightened during installation and check the energy -saving pump every period of time to avoid loosening and prevent vibration when the vertical energy -saving pump is started and affects the performance of the pump.

(4) The rotor part of the energy -saving pump before installing the pipeline should not be stuck or friction, otherwise the reasons for the energy -saving pump should be removed.

(5) Energy -saving pumps are used on the occasion of suction. The bottom valve should be installed and the imported tube should not have too large elbows. There should be no leakage and leakage. It can prevent the inhalation performance of the energy -saving pump.

(6) In order to be convenient to use and repair safely, a regulating valve can be installed on the inlet pipeline of the vertical energy -saving pump, and a pressure gauge is installed near the outlet of the vertical energy -saving pump to ensure that the energy -saving water pump runs under the ideal conditions. Can extend the life of the pump.