The main working components of the mineral pump are impeller, and there are a certain number of blades on it. The leaves are fixed on the shaft and rotated by the shaft. The shell of the pump is a spiral diffusion chamber, the water absorption port of the pump is connected to the water absorption, and the drainage port is connected to the drainage pipe. Then the precautions for the selection of the mineral pump. Do you have a certain understanding?

     Before starting the water pump, first infuse the water from the water injection funnel to the pump, and then start the water pump. The impeller rotates with the axis. The water in the impeller is also rotated by the leaves. Under the action of centrifugal force, water flows from the impeller inlet to exit. In this process, the kinetic and power of water is improved. After the water discharged by the impeller is spirally diffused chamber, most of the kinetic energy transformed into stress energy.

     Then transport it along the drainage pipe. At this time, the leaves of the leaf wheel were vacuum due to the discharge of water. Under the influence of atmospheric pressure in the water absorption well, enter the impeller through the water absorption pipe. The leaf wheels are rotating continuously, and the drainage is continuously carried out.

     When choosing a mine pump, there are some elements that we need to consider. First of all, when selecting a diving pump, you must try to choose energy saving and environmentally friendly emerging and high -tech products, so as to completely break the restrictions of traditional traditional submersible pumps in the past.

     In addition, a faster submersible pump should be selected in terms of work efficiency to replace traditional equipment. The bearing of the mineral pump is also very important. Generally speaking, it is mainly divided into two types: rolling bearing and sliding bearing. Then the precautions for the selection of the mineral pump, if it is divided according to the load load, it is divided into two types: rolling bearing and rolling bearing. Their structure is the same There are still some gaps. If you need to carry heavier things, choose a rolling bearing.