The work part is submerged in the liquid, and there is no leakage of the shaft seal. And the area is small, reliable, convenient for maintenance, and strong corrosion resistance. It is widely suitable for industrial departments such as chemical industry, pharmaceutical, papermaking, oil and other industrial departments.

The vertical motor of the liquid pump is on the bolt -tight motor seat, and directly drives the pump, the pump, the intermediate pump, the pump, the liquid pipe, and the flange of the pump, the pump body, the pump, the pump rack, the pump stand, the pump stand, the pump stand, On the bottom plate, the overall pump is installed on the container through the bottom plate. The axial force and radial force of the pump, (including the water pressure generated in the operation of the pump, the impeller and the rotor weight, etc.), all of which are installed in the bearing box to the thrust ball bearings, the single -column to the heart spherical bearings; and sliding guidance The axis is affected to ensure the normal operation of the pump safety. The bearings are lubricated with butter, and the bearing bearing is lubricated with the liquid transported by the bearing. Therefore, the liquid surface must be higher than the center line of the leaf wheel during work. The length L of the container is different, and it is divided into the structure of the intermediate conductive bearing and the structure without an intermediate conductor. The structure of the new hydraulic pump is the purpose of pumping and motor connection into one, to achieve the purpose of accurately sending materials to the target storage.